Utility Channel Support Systems

Strong, Fast, Economical and Adjustable
Utility Channel Support System
Insert the spring nut anywhere along the continuous slotted channel. The rounded nut ends permit easy insertion.
Utility Channel Support System
A 90° clockwise turn aligns the grooves in the nut with the inturn edges of the channel. Fitting can be placed anywhere along the channel opening, permitting complete freedom of adjustment. The need
for drilling holes is eliminated.
   
Channel Support System
Insert the bolt through the fitting and into the spring nut. 
See illustration 5 for end
view showing the nut in place)
Channel Support System
Additional channel sections can now be bolted to the fitting already in place by following procedure described in
steps 1-3.
 
 
Channel Support System
Tightening with a wrench locks the
serrated teeth of the nut into the iturned edges of the channel, to complete a strong, vise-like connection.
Channel Support System
ELCON SUPPORT SYSTEM is designed with many time saving features. Fully
adjustable & reusable, with a complete line of channels, fittings & accessories for Multipurpose applications.

• NO WELDING
• NO DRILLING
Are the basic fundamentals of installing this system.

   
Applications :
ELCON Support System can be used for :
 
ELECTRICAL & INSTRUMENTATION APPLICATIONS
a. Flexible Cable Tray Support Systems
b. Lighting Fixture Supports
c. Instrument Mounting Plates
d. Conduit Supports etc…
MECHANICAL APPLICATIONS
a. Piping Rack
b. Concrete Inserts
c. Beam Attachments
d. A/c Duct Supports etc…
 
Utility Channel Support System
Utility Channel Support System
Utility Channel Support System
     
 
Channel Code
Height
Width
Thickness
A-A 82
82.5
41.3
2.5
A-A 61
61.9
41.3
2.5
A-A 41
41.3
41.3
2.5
A-B 41
41.3
41.3
2.0
A-C 41
41.3
41.3
2.0
A-C 41
41.3
41.3
1.5
A-B 21
21.3
41.3
2.5
A-B 21
21.3
41.3
2.0
A-C 21
21.3
41.3
1.5
Combinations
 
 
Standard Applicable
 
Materials : 
Hot Rolled 
Steel as per IS 1079, ASTM A621, BS1449 HR2, JIS G 3131 SPHD 
Cold Rolled 
- Steel as per IS 513, ASTM A336, BS 1449CR, JIS G3141 
Structural Steel -
 ( for fittings & brackets ) IS 2062, ASTM A570, BS 4360, JIS G 3101

Hot Dip Galvanized : 
As per IS 2629, ASTMA123, BS 729, JIS H 8641
Hot Rolled
 
 
 
Concrete Inserts :
 

Continuous Slot Concrete Inser are designed to provide a pre-set support system, cast in concrete ceilings, walls & floor to allow flexibility of attachments at any point along the channels. This provides as excellent support for pipe, conduit, cable trays etc.

Continuous Concrete Inser are manufactured from Am-Strut's standard Channel. Anchor Spacing is 200 mm C/C.
We also provide special PVC end caps, to avoid concrete insertion into the channels at the time of concreting. 
Support Pipe
   
 
 
Accessories Required
 

ELCON offers a comprehensive range of fittings & accessories to complete the total support system. Generally, fittings are manufactured from 6mm Mild Steel, however can be offered in different dimensions as well as thicknesses depending on applications.

Normal finish of all brackets and fittings is HOT DIP GALVANIZED.

All holes for all the fittings are a standard size of 14 mm, made of M12 Hex Bolts.

Support System Accessories